need source for brass fitting for fuel selector

General discussion area.
Post Reply
Tristano
Posts: 3
Joined: Sat Mar 12, 2022 11:32 pm

need source for brass fitting for fuel selector

Post by Tristano »

the hex brass fitting to connect the aluminum tubes to the old fuel valve selector
(4 positions: left right off off) is according to a hand written note found on the drawing
p/n 81-LB0658
Apparently was availabke years ago from T.E. Conklin Brass Fittings NY but they seem to be out if business.
Does anybody has a source or a part number ?
User avatar
Alfred Scott
Posts: 33
Joined: Tue Oct 13, 2020 11:41 am
Location: Richmond, VA
Contact:

Re: need source for brass fitting for fuel selector

Post by Alfred Scott »

Certainly there is a Swagelok equivalent.

Alfred
Alfred P. Scott
5407 Patterson Ave, Suite 202B
Richmond
VA 23226

(804) 353-1713
cell: (804) 690-4591
alfred@seqair.com
alfred.scott@me.com
www.seqair.com
Post Reply